Installation

A library of projects and general installation instructions for projects built with Mutual Materials products.

Individual product datasheets also contain installation instructions and more specific product information. In building a project, please also refer to the specific product datasheet for the product you are installing.

Installation Guides

Paver Installation Instructions The following are standard installation guidelines for a typical sand-set paver application. Please refer to the individual tech sheets for more specific…
Retaining Wall Steps and Stairs This video will show you how to build stairs into retaining walls using Mutual Materials products.  Adding steps into retaining…
Sand-Set Slab Installation Instructions The following are standard installation guidelines for Architectural Slabs in a sand-set application. NOTE: Architectural Slabs cannot be used in a vehicular…
Slimbrick Installation with LATICRETE The LATICRETE® Masonry Veneer Installation System (MVIS) Mutual Materials recommends the LATICRETE® Masonry Veneer Installation System (MVIS) for adhering Slimbrick. For over…
Tuscan Water Wall Instructions How to build a TuscanStone Water Wall from Mutual Materials. Items Needed:  TuscanStone, Glue: 3 (10.5 oz tubes) Tools Needed:…
TuscanStone Bench B Instructions How to build TuscanStone Bench B from Mutual Materials. Items Needed:  TuscanStone blocks, Glue: 4 (10.5 oz tubes) Tools Needed:…
TuscanStone Planter C Instructions How to build TuscanStone Planter C from Mutual Materials. Items Needed:  TuscanStone, Glue: 7 (10.5 oz tubes) Tools Needed: Level, Caulking…
TuscanStone Wall B Instructions How to build TuscanStone Wall B from Mutual Materials. Items Needed:  TuscanStone, Glue: 2 (10.5 oz tubes) Tools Needed: Level,…

Paver Patterns

Videos View More

  • BYOT Shows How to Stake Out and Excavate a Patio Area

    Brent from BYOT shows how to stake out and excavate a paver patio area.

  • BYOT Shows How to Lay Pavers

    Brent from BYOT shows how install concrete pavers. Includes angle cuts, edge restraints, and joint sand application.